.png)
Forehead Thermometer
IKONN | TF - 1
The IKONN TF-1 is an infrared thermometer designed to measure forehead, ear, and object temperature quickly and accurately. By default, the thermometer can be held against the forehead to read your temperature. Removing the cap at the front allows it to be used for reading ear temperature. When the thermometer is off, holding the mode button for three seconds puts it into object temperature mode, allowing you to scan the temperature of objects up to 100 °C.
Features
Forehead/ear/object measurement
1 second temperature reading
Ergonomic design
Switchable units of measure
Precision: 0.1°C / 0.2°F
Batteries: 2 x 1.5 V AAA
Dimensions: mm
Weight: g
.png)
Additional benefits when pairing
it with the IKONN Controller or myIKONN app
When combined with the IKONN Controller or myIKONN app, which can provide audio feedback in your chosen language. The system is intended to support users unable to view the screen for any reason.
Instructions
Forehead Measurement
Place the probe in the center of the forehead, slide it toward the temple while holding the Measure button, then release. Ensure the forehead is clean and dry and that both the user and thermometer have been in the same room for at least 30 minutes.
Ear Measurement
Remove the probe cover, gently place the probe in the ear canal, and press the Measure button. Make sure the ear is clean. Always measure in the same ear. Children under 1: pull ear straight back. Children 1+ and adults: pull ear up and back.
Object and Room Temperature
With the thermometer off, hold the Memory/Mute button for 3 seconds, then press Measure. Hold 1–5 cm from the object and press Measure again.
After Measurement
Read the temperature, view past results in memory if needed, clean the probe, and store the device in a dry place. Wait at least 10 seconds before the next measurement.
Understanding the Result
Green light: normal temperature.
Orange light: slight fever.
Red light: high fever.
Useful Functions
Switch between mute/unmute, view up to 35 memory records, convert °C/°F, or adjust temperature compensation if needed.
Battery and Power
The device turns off automatically after 10 seconds. Replace the two AAA batteries when needed.
Care and Cleaning
Clean the probe and housing with 70% alcohol and let it dry completely. Do not immerse the device in water or use abrasive cleaners.